If your DNS server isn’t responding, you have several options. You can try refreshing your cache, reconnecting to the network, or switching to another web browser. It’s also possible that your router or firewall is acting up. If these methods don’t work, you can try troubleshooting the issue by restarting your PC in Safe Mode.
Troubleshoot Network Problems
If you’re getting the DNS server not responding message, you may have a problem with your network. There are several ways to troubleshoot this error. One option is to restart your device.
You can do this by pressing the power button on your device or unplugging it from your power outlet. Restarting the device will clear its cache and fix any DNS problems. Another option is to change your DNS server address.
When the DNS server is not responding, your browser will be unable to access the internet. The issue could be caused by a server outage or a misconfiguration of your network. Restarting your computer and router is a common way to fix this problem. There are also other reasons for the error.
If your DNS server is responding slowly, you should try resetting the router. Resetting the router will disconnect any devices attached to it.
After rebooting the router, you must enter the factory password that’s printed on the bottom of your router. After doing this, you should be able to connect to your network and access the website.
Connect With a Different Device
If your DNS server isn’t responding, one way to get around it is to try changing the DNS server that is set on your computer. This is a simple process that will also improve your connection speed. Start by opening the classic Control Panel application.
Make sure that your view mode is “Category”. From there, select the Network and Internet heading, followed by “Network and Sharing Center.” Type the following commands into the command line:
You can also try changing the browser on your computer. It may be that the current browser you’re using is the cause of this problem. You can try switching to a different one, which usually solves the problem. Mozilla Firefox, Microsoft Edge, or Safari are some popular browsers you can use.
If your PC is experiencing this problem, try using another device that’s on the same network. This way, you can check if there’s something wrong with your network connection. If you’re still having trouble accessing a website, try using mobile data.
Switch to Another Web Browser
If the DNS server on your computer is not responding, you can try switching to a different web browser. Sometimes this problem can be caused by a problem with the router. If you can’t use the default browser, you can try using a mobile data connection to try to access the website.
The problem may also be caused by misconfigured DNS settings. To check, open the Network connections window and look for any connections that aren’t in use. If the problem persists, disable those connections and replace them with others. Another solution is to upgrade your web browser. Changing the DNS server address can also solve the issue.
The DNS server might be malfunctioning due to a broken Winsock Catalog. This is a group of network settings on your computer that give programs the instructions to connect to the internet. When the DNS server isn’t responding, you’ll be unable to access the website. You may want to try changing the DNS server settings on your device. If that doesn’t work, try using a different browser.
Restart PC in Safe Mode
If you’ve recently encountered a DNS server not responding error, you can try restarting your PC in Safe Mode to fix the problem. This will allow you to connect to the internet while the PC is running in a simplified mode. In this way, you’ll be able to see if the problem is related to the operating system.
Sometimes, this issue is caused by a third-party application that interferes with the internet connection. If you are using a VPN, you may be having trouble connecting to the DNS server. If this is the case, you can disable the VPN tool and restart the PC.
If the problem is caused by the operating system, you might want to try rebooting the PC in Safe Mode to fix DNS server not recognizing the domain name. This process will allow you to use the default browser and avoid installing a new browser.
Restart Modem or Router
If you are experiencing problems with DNS servers, you may have to restart your router or modem. This will refresh the cache and bring your devices back online. In many cases, you may need to unplug your devices to restart the router. Then, plug them back in. This should resolve the problem.
If this does not work, you can try a few other tips. Restarting the modem or router may also solve the problem. The first step is to unplug the power cable. You can then restart the device by pressing the power button for 30 seconds. Another way to restart a device is to reset it back to factory settings.
Sometimes, DNS server not responding error is caused by the use of third party software. You may need to remove these software programs from your computer and restart the device.
Another option to fix DNS server not responding problem is to restart your modem or router. This can clear out the data cache and restore connectivity.
Deactivate Antivirus and Firewall
If your DNS server is not responding, first check if your antivirus and firewall are turned off. These programs can block specific websites and IP addresses. Once they’re disabled, open the firewall and antivirus settings and try to access the website again.
If this doesn’t work, try switching antivirus programs or reconfiguring firewall settings. After making the changes, turn the firewall and antivirus settings back on. In addition, disable secondary connections and check your network adapter settings.
Windows users can temporarily disable their firewall and antivirus programs. This may fix the problem. However, be warned that disabling your antivirus program could cause other issues. Windows users can access these settings through the Start menu, while Mac users can find them in System Preferences.
If you’re not sure whether to disable antivirus and firewall programs, open the Control Panel and go to System and Security>Windows Defender. Once the firewall and antivirus are disabled, you should be able to use your DNS server again. This step is recommended if your DNS server is not responding.
Disable Other Connections
If you have an issue with DNS server not responding on your computer, one of the first things to try is disabling other connections. You can do this in the Network Connections window of Windows. Right-click on the connection and select properties. You can disable the connection completely if it is not in use.
If this method does not work, you can try changing the browser you’re using. Another possible solution is to reboot your device. You can use a different browser, such as Safari, Microsoft Edge, or Mozilla Firefox. By doing this, you can ensure that your DNS server is running properly.
Another way to fix DNS server not responding error is to disable Internet Protocol Version 6 (TCP/IPv6). This is the latest version of the internet protocol. Disabling this type of connection is not a proven fix for DNS server not responding error.
Change the DNS Server Address
If your DNS server is not responding, you may encounter a number of problems. One of the most common causes is a server outage.
In such cases, your browser may display messages like “The DNS server is temporarily unavailable”. In most cases, it is possible to fix the problem by switching to another browser or changing your firewall settings. If this does not work, you may need to restart your router.
Another cause of DNS server problems is network connectivity issues. If you use a Mac, you can try to access Control panel and click on Network and Sharing Center. From there, you can select the Troubleshoot option. If you’re using Windows, you can also open network settings and click on Troubleshoot.
Sometimes, you may be experiencing DNS server not responding errors because of your virtual WiFi miniport adapter. To unmark this option, right-click on the connection and click “Properties”.
Similarly, you can also select IPv6 by clicking on its name and then clicking the “disable” option. This will disable IPv6 and fix the DNS server not responding error.